Release Eco-Raid-Group - Fujitsu ETERNUS DX80 S2 Cli User's Manual

Chapter 3 Configuration Settings and Display
3.3 RAID Group Management > release eco-raid-group

release eco-raid-group

This command releases the ECO schedule that is associated with a specific RAID group(s).
■
Syntax
release eco-raid-group {-rg-number
■ Parameter
-rg-number
or
-rg-name
■ Example(s)
The following example releases an ECO schedule associated with the RAID group named "RGP001":
CLI> release eco-raid-group -rg-name RGP001
The following example releases an ECO schedule associated with RAID groups #1 – #10 at the same time:
CLI> release eco-raid-group -rg-number 1-10
rg_numbers
This parameter specifies a RAID group identifiers. One or more parameters can be specified.
For details, refer to "1.2.8 RAID Group Syntax" (page
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
rg_names
| -rg-name
22).
142
}
P2X0-1030-09ENZ0