Changing The Device Name; Configuring The Time Settings; Customizing The Appearance Of The Text Overlay - Cisco 5010 User Manual

Video surveillance indoor fixed hd ip dome camera
Hide thumbs Also See for 5010:
Table of Contents

Advertisement

System Tab
Information Settings
The System Information page fields are read-only and include the firmware version, hardware version,
model number, and serial number of the system.

Changing the Device Name

Click the System tab.
Step 1
Click the Device Name box and highlight the text.
Step 2
Type a user-friendly name into the Device Name box (2 to 64 characters). A user-friendly name makes
Step 3
it easier to recognize the device on the network. Examples of user-friendly names are Front Door, Lobby,
or Parking Lot.
Click Save to save the new device name, or click Reset to restore to the previously saved device name.
Step 4

Configuring the Time Settings

If the camera is connected to a Dynamic Host Configuration Protocol (DHCP) network that has time
server properties configured, the camera will synchronize automatically with the time server. If the
DHCP network's time server properties are not configured or the network does not have a time server,
you need to configure the DHCP settings manually.
Click the System tab.
Select General from the drop-down menu.
Step 1
Type the IP address of the time server in the Time Server field. The time server is an external server that
Step 2
uses Network Time Protocol (NTP) to synchronize the camera date and time settings.
Select the Time Zone option. Select the continent and the region that are closest to the camera's location
Step 3
from the Time Zone drop down menus.
Note
Set the Overlay setting. Select On to overlay the date and time on the video stream, or select Off to turn
Step 4
off this setting.
Click the Save button to save the settings, or click the Reset button to clear all of the information you
Step 5
entered without saving it.

Customizing the Appearance of the Text Overlay

Click the System tab.
Step 1
Select General from the drop-down menu.
Step 2
Cisco Video Surveillance 5010/5011 Indoor Fixed HD IP Dome Camera User Guide
3-8
If your location observes a form of daylight saving time, the system will automatically change
the time on the associated dates.
Chapter 3
Operation
OL-22669-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

5011

Table of Contents