Handlers; Creating An Event Handler: Send Email - Cisco 5010 User Manual

Events Tab
Click the Delete Source button. A dialog box appears with the message "Are you sure you want to delete
Step 4
the source?"
Step 5 Click OK. The source profile is deleted from the defined source box.

Handlers

Figure 3-18 New Event Handler Page
Event handlers are the actions that the camera takes when an event occurs. The camera supports the
following event handlers:
•
•
•

Creating an Event Handler: Send Email

To use email notification, the camera must be connected to a local area network (LAN) that maintains
Note
an SMTP mail server. Consult your network administrator for information on configuring email
notification on your local network.
Step 1 Configure the SMTP server to send email.
Cisco Video Surveillance 5010/5011 Indoor Fixed HD IP Dome Camera User Guide
3-38
Send Email: Sends an email to a defined email address when an event is activated. The Simple Mail
Transfer Protocol (SMTP) server must be configured to accept the camera's IP address.
Write JPEG to SD Card: Saves a JPEG of the activated event to an SD card. An SD card must be
installed in the device for this handler to function.
The SD card must be formatted as FAT32. Other formats are not compatible with the camera.
Note
Upload JPEG to FTP Server: Saves a JPEG of the activated event to a defined FTP server.
Chapter 3 Operation
OL-22669-01