Creating A New Group; Editing A Group; Deleting A Group - Cisco 5010 User Manual

Chapter 3 Operation
Note

Creating a New Group

Place your mouse pointer over the Users and Groups tab.
Step 1
Select Groups from the drop-down menu.
Step 2
Click in the Group Name box and type a name for the group you are creating (2 to 23 alphanumeric
Step 3
characters).
Click in the Description box and type a description for the group you are creating (2 to 23 alphanumeric
Step 4
characters).
Select the appropriate check boxes to choose the permissions you want to assign to this group.
Step 5
Click the Save button to save the settings and create a new group; the new group profile appears in the
Step 6
box on the left side of the page. Click the Reset button to clear all of the information you entered without
saving it.

Editing a Group

Place your mouse pointer over the Users and Groups tab.
Step 1
Select Groups from the drop-down menu.
Step 2
Click the group profile that you want to edit from the box on the left side of the page.
Step 3
Double-click in each of the text boxes to highlight the text. Type the new information in each text box.
Step 4
Select or clear the appropriate check boxes from the groups list.
Step 5
Click the Save button to save the settings, or click the Reset button to clear all of the information you
Step 6
entered without saving it.

Deleting a Group

Place your mouse pointer over the Users and Groups tab.
Step 1
Select Groups from the drop-down menu.
Step 2
Step 3 Click the group profile that you want to delete from the defined group section located in the box on the
left side of the page.
Click the Delete Group button. A dialog box appears with the message "Are you sure you want to delete
Step 4
the group?"
Click OK. The group profile is deleted from the defined group profile section.
Step 5
OL-22669-01
The "admin" user cannot be deleted.
Cisco Video Surveillance 5010/5011 Indoor Fixed HD IP Dome Camera User Guide
Users and Groups Tab
3-33