Resetting The Terminal; Connecting The Terminal To A Computer (Pc) Via A Usb Connection - Honeywell Dolphin 75e User Manual

Hide thumbs Also See for Dolphin 75e:
Table of Contents

Advertisement

Resetting the Terminal

If the terminal completely stops responding, you may need to perform a Factory Reset (Clean Boot). Because a Factory
Reset can result in data loss, use this method only if all other recovery methods have failed. All personal content is erased (e.g.,
emails, pictures, contacts) and factory default settings are restored when a factory reset is performed.
Caution: A Factory Reset (Clean Boot) erases the memory in the terminal, including all applications and data files,
with the exception of those found in the Flash File Store or any removable storage.
1. Touch All Apps
> Settings
2. Select Backup & Reset, and then Factory Data Reset.
3. To erase all data on the SD card in addition to all data from internal storage, check the Erase SD card box.
4. To erase all data in the IPSM in addition to all data from the internal storage, check the Erase IPSM box.
5. Select Reset phone.
To perform a Factory Reset if the touchscreen is unresponsive and all other recovery methods have failed:
1. Press and hold the Power button
2. Press and hold the Recent

Connecting the Terminal to a Computer (PC) via a USB Connection

You can transfer files (e.g., pictures, music, and videos) between your computer and the terminal using the supplied USB
Charge/Communication cable or a Dolphin 70e Black HomeBase with a standard USB cable.
Note: The terminal supports Hi-Speed USB communication (USB 2.0) with a maximum data transfer rate of 480 Mbps.
1. Connect the terminal to your PC using the USB Charge/Communication cable supplied.
USB Door
Right Side Panel
of the Terminal
USB Charge/Communication Cable
2. If a USB connection automatically establishes, a notification briefly appears at the top of the screen on the terminal:
Connected as a media device or
.
for approximately 8 seconds until the terminal starts to reboot.
and Volume Down
buttons.
1
Micro USB Port
2
Connected as a camera.
3
USB Port
1 - 13

Advertisement

Table of Contents
loading

Table of Contents