Restarting The Terminal; Resetting The Terminal - Honeywell Dolphin 75e Quick Start Manual

Syncing Data with a Computer (PC)
To automatically sync files between your Dolphin terminal and PC:
1. Connect the terminal to the PC using the USB charge/communication
cable supplied. If you are using Windows® 8, the Windows Phone® app
automatically opens on the PC. If you are using Windows 7 or Mac, go to
www.windowsphone.com
app for desktop or Mac.
2. In the Windows Phone app, set your phone name and sync preferences.
The default phone name is "Windows Embedded Handheld". You can
always modify your preferences later by selecting Settings.
To move files between your Dolphin terminal and PC without using the app:
1. Connect the terminal to the PC using the USB charge/communication
cable.
2. Depending on the Windows operating system either open File Explorer
or Windows Explorer.
3. Under Computer, click on Windows Embedded Handheld > Phone.
4. You can copy, delete and/or move files or folders between the PC and
the terminal or the microSD card installed in the terminal as you would
with any other storage drive (e.g., cut and paste or drag and drop).

Restarting the Terminal

You may need to restart the terminal to correct conditions where an applica-
tion stops responding to the system or the terminal seems to be locked up.
• Press and hold the Power button
power off" appears, release the button and swipe down toward the bottom
of the screen. Press the Power button
To perform a restart if the touch panel display is unresponsive:
• Press and hold the Volume Down
simultaneously for 10-15 seconds. The terminal automatically restarts.

Resetting the Terminal

For information on how to perform at Factory Reset (Clean Boot), see the
user guide.
to download and install the Windows Phone
. When the message, "slide down to
and Power
to turn the terminal back on.
buttons