Restarting The Terminal; Resetting The Terminal - Honeywell Dolphin 75e Quick Start Manual

If a USB connection does not automatically establish:
a. Touch All Apps
b. Touch More , and then USB computer connection.
c. Select either Connected as a media device (MTP) or Camera (PTP).
Your selection is stored as the default but is easy to change by accessing the
Notification panel. Swipe down from the Status/Notification bar at the top of the
screen to view USB connection details and change the type.
4. Depending on the Windows
or Windows Explorer.
5. Under Computer, click on D75E.
6. You can now copy, delete and/or move files or folders between the
computer and the terminal or the microSD card installed in the terminal
as you would with any other storage drive (e.g., cut and paste or drag
and drop).

Restarting the Terminal

You may need to restart the terminal to correct conditions where an applica-
tion stops responding to the system or the terminal seems to be locked up.
• Press and hold the Power button
then select Reboot.
To preform a restart if the touch panel display is unresponsive:
• Press and hold the Power button
terminal starts to reboot.

Resetting the Terminal

For information on how to perform at Factory Reset (Clean Boot), see the
user's guide.
Support
To search our knowledge base for a solution or log into the Technical Support
portal and report a problem, go to www.hsmcontactsupport.com.
> Settings
®
operating system either open File Explorer
until the options menu displays, and
for approximately 8 seconds until the
> Storage.