Installing Upgrades - Honeywell Dolphin 75e User Manual

Installing Upgrades

Upgrades for the Power Tools and other system software on the Dolphin terminal come in the form of zip files and
are available from Customer Support
To install a software upgrade:
1. Copy the upgrade file (*.zip) into one of the following folders:
• Internal storage\honeywell\autoinstall on the terminal
Software upgrades saved to this folder, do not persist when a Factory Reset (Clean Boot) is performed.
• IPSM card\honeywell\autoinstall on the terminal
Software upgrades saved to this folder, persist when a Factory Reset (Clean Boot) is performed.
• \honeywell\autoinstall on an SD card (if installed)
Software upgrades saved to this folder, do not persist when a Factory Reset (Clean Boot) is performed.
2. Touch All Apps > AutoInstall Settings
3. Select Packages Update from the AutoInstall Settings
installs the software upgrade.
Depending on where you saved the file, you can also initiate a software upgrade using the terminal buttons instead of
the package update option.
If the file is located in the IPSM card\honeywell\autoinstall folder:
• Initiate a terminal Reboot. When the Honeywell logo appears and the green LED turns On, simultaneously press and
hold the Volume Up
If the file is located in the \honeywell\autoinstall on an SD card:
• Initiate a terminal Reboot. When Honeywell logo appears and the green LED turns On, simultaneously press and
hold the Volume Down
or www.honeywellaidc.com.
. Verify Autoinstall is enabled.
and Home buttons until the green LED turns Off.
and Home buttons until the green LED turns Off.
screen. The terminal automatically initiates a reboot and
1 - 15