Wi-Fi Network Connections; Turning Wi-Fi Networking On Or Off; Connecting To A Wi-Fi Network; Receiving Network Notifications - Honeywell Dolphin 75e User Manual

Wi-Fi Network Connections

Turning Wi-Fi Networking On or Off

1. Touch All Apps
2. Touch the Wi-Fi OFF/ON toggle box to turn the radio

Connecting to a Wi-Fi Network

1. Touch All Apps
2. Verify the Wi-Fi is turned
The terminal searches for available Wi-Fi access points within range of the device. If the terminal previously connected
to a Wi-Fi network, it automatically reconnects to the same network.
3. Touch the network name you want to connect to from the available network list.
4. If the network is secured, a dialog box appears requesting information relevant to the network security protocol (e.g.,
password, key, or certificate). Enter the required information.
5. Touch Connect.
Note: To remove a Wi-Fi network the terminal previously connected to, touch the network name, and then touch Forget, to
delete the stored network information.

Receiving Network Notifications

If Wi-Fi networking is turned On, you can set the terminal to notify you when an open network is available.
1. Touch All Apps
2. Press the Menu button
3. Touch the check box to toggle Network notification On (checked) or Off.

Adding a Wi-Fi Network

1. Touch All Apps
2. Verify the Wi-Fi is turned
3. Touch the plus sign (+) located at the bottom of the available Wi-Fi network list.
4. Enter the Network SSID (Wi-Fi network name).
5. For secure Wi-Fi network connections, touch None under Security, and then select the type of security protocol
required from the pop-up menu (e.g., WEP, WPA/WPA2 PSK or 802.1xEAP). To access Proxy and IP settings, select
to box next to "Show advanced options".
6. Enter any additional security information required by the type of security protocol selected.
7. Touch Save.
6 - 2
> Settings .
> Settings > Wi-Fi.
.
> Settings > Wi-Fi.
, and then touch Advanced.
> Settings > Wi-Fi.
.
or .