Communication; Requirements; Establishing Usb Communication; Mounting The Homebase - Honeywell Dolphin 75e User Manual

Communication

Dolphin terminals support USB communications out of the box. The base also supports USB communications via the USB port
located on the back. The base acts as a USB device by interfacing the USB signals of the Dolphin terminal to the USB of the
host workstation. Using a standard USB cable, the base's USB interface allows the Dolphin terminal to communicate with a
workstation.
Note: This base cannot be daisy-chained.

Requirements

• A base powered by a power cable and power adapter cable
• A standard USB (Type A to B) communication cable
• A work station running Windows XP, Windows Vista, or Windows 7.

Establishing USB Communication

1. Connect power to the HomeBase (see
2. Plug the USB communication cable into the USB port on the back of the base.
Note: The Dolphin terminal should always be removed from the HomeBase when connecting or disconnecting the USB
cable.
3. Connect the other end of the USB cable to the host workstation.
4. Insert the Dolphin terminal into the terminal well of the base. The Dock LED illuminates blue.
5. If a USB connection automatically establishes, a notification briefly appears at the top of the screen on the terminal:
Connected as a media device or
If a USB connection does not automatically establish:
a. Touch All Apps
b. Touch More
c. Select either Connected as a media device (MTP) or Camera (PTP). Your selection is stored as the default but is
easy to change by accessing the Notification panel. Swipe down from the Status/Notification bar at the top of the
screen to view USB connection details and change the type.
4. You can now copy, delete and/or move files or folders between the computer and the terminal or the microSD card
installed in the terminal as you would with any other storage drive (e.g., cut and paste or drag and drop).
Note: When you connect as a Camera (PTP) only the DCIM and Pictures Folders from the Internal Storage show in File
Explorer or Windows Explorer.

Mounting the HomeBase

Set the base on a dry, stable surface, such as a desktop or workbench near an electrical outlet. The user should be able to view
and operate the Dolphin terminal while it is in the base. When choosing a mounting location, bear in mind that the location must
allow users' easy access to the Auxiliary Battery Well and the back panel of the HomeBase where the USB port and the power
jack are located.

Optional DIN Rail Mount

A DIN rail (7.5 X 35 mm) may be installed on the bottom of the base to provide the optional security of mounting the base to
a flat horizontal surface with hardware.

Additional Hardware

• DIN Rail, Qty. 1
• 3/16 in. dia x 5/8 in. long pan head screw, Qty. 2
• 1/2 in. OD x 7/32 in. ID x 3/64 in. thick washer, Qty. 4
8 - 6
Power on page 8-4).
Connected as a camera.
> Settings > Storage.
, and then USB computer connection.