Restarting The Terminal; Resetting The Terminal - Honeywell Dolphin 75E User Manual

4. Insert the new battery and install the battery door.
5. Apply pressure to the edges of the battery door to ensure the door is properly closed. Engage the door lock.
6. Press the Power button
Important: All battery and connector doors must be present, undamaged, and properly closed to maintain the environmental
rating of the terminal.

Restarting the Terminal

You may need to restart the terminal to correct conditions where an application stops responding to the system or the terminal
seems to be locked up.
• Press and hold the Power button
down toward the bottom of the screen. Press the Power button to turn the terminal back on.
To perform a restart if the touch panel display is unresponsive:
• Press and hold the Power

Resetting the Terminal

You may need to perform a Factory reset (clean boot) if you are transferring the terminal to a new owner that requires the use
of a different Microsoft account and a clean configuration without any of the custom apps, settings, and data you added. A reset
may also be required if the terminal has become unresponsive and all other recovery methods have failed. If you are transferring
ownership, use Method 1 (see below) to reset the terminal back to the factory state. If the terminal is unresponsive, use
Method 2 (on page 1-13).
When a reset is performed, all personal content is erased (e.g., emails, pictures, contacts) and all factory default settings are
restored on the terminal. The reset discards any account information you added, including your Microsoft account information.
Only installed Microsoft over-the-air (OTA) updates persist after a reset is performed.
Caution: A Factory Reset (Clean Boot) erases the memory in the terminal, including all applications and data files,
with the exception of those found in the removable storage. Any custom provisioning must be
reimplemented after a Factory Reset.
Method 1
To perform a Factory Reset (Clean Boot):
1. Touch Settings
2. Touch System > About.
3. Select Reset your phone.
4. If you want to Also erase SD card, touch the box to select the option.
1 - 12
.
. When the message, "slide down to power off" appears, release the button and swipe
button down for approximately 13 seconds. The terminal automatically restarts.
on the Apps list screen.