Resetting The Terminal; Hard Reset (Cold Boot) - Honeywell Dolphin 70e Black User Manual

5. Secure the battery retention strap.
6. Install the battery door. The terminal begins booting as soon as power is applied.
We recommend use of Honeywell Li-ion battery packs. Use of any non-Honeywell battery may result in
damage not covered by the warranty.

Resetting the Terminal

There are two types of system resets: a Hard Reset or a Factory Reset. The hard reset preserves all
data stored in the file system. Contact a Honeywell technical support representative for information on
how to perform a Factory Reset. For contact information, see

Hard Reset (Cold Boot)

A hard reset re-boots the device and closes any open applications running in RAM at the time of the
reset.
1. Press and hold the Power button
2. Touch Reboot.
Note: To perform a Hard Reset if the touch screen has stopped responding, press and hold the Power button
for approximately 8 seconds until the terminal starts to re-boot. When the reset is complete, the Lock screen
displays.
2 - 18
Technical Assistance
until the Phone Options menu displays.
on page 14-1.