Turn Your Device On And Off - NETGEAR FUSE User Manual

2. Insert the larger (Type A) end of the micro-USB cable into your computer.
3. Insert the other end of the cable into the micro-USB port on the side of your device.
●
While your device is charging, the percentage charge that the battery has displays on the LCD
(and the Mobile Hotspot Manager home page, if your device is on).
●
When your device is fully charged, the full battery icon and message display on the LCD (and the
Mobile Hotspot Manager home page, if your device is on).

Turn Your Device On and Off

Use the Power button to turn your device on and off.
Turning Your Device On
1. Make sure that:

Your device has a charged battery inserted.
– or –

Your device is connected to the AC charger or a computer (through the micro-USB cable).
2. If the LCD is blank, press and hold the Power button until the screen lights up.
Getting Started
DRAFT
11