Table of Contents
Advertisement
Configure the WiFi Signal If a Device Is Tethered
If a device is tethered to the hotspot through a USB connection, you can turn the hotspot's
WiFi signal off so that other devices cannot connect to the hotspot WiFi network. If you allow
the WiFi signal to stay on, all devices, including the tethered device, can connect to the
hotspot WiFi network and access the Internet.
Note:
To tether your hotspot to a computer, you must download the
necessary device drivers using TRU-Install. For more information, see
Configure a Tethered Connection
Turn On the WiFi Signal If a Device Is Tethered
If you allow the WiFi signal to stay on when a device is tethered to the hotspot through a USB
connection, all devices, including the tethered device, can connect to the hotspot WiFi
network and access the Internet.
To turn on the WiFi signal if a device is tethered to the hotspot:
1.
Launch a web browser from a computer or WiFi device that is connected to the hotspot
network.
2.
Enter http://netgear.aroundtown or http://192.168.1.1 in the address field of the web
browser.
The hotspot web page displays.
3.
Enter the admin login password in the Sign In field.
The default password is password. The password is case-sensitive.
4.
Click the Sign In button.
The Sign In section closes.
5.
Select Wi-Fi > Options.
6.
Scroll down to the Wi-Fi Options section.
7.
Select the Wi-Fi stays On radio button.
The Submit button displays after you make a selection.
8.
Click the Submit button.
Around Town LTE Mobile Internet
on page 20.
Control Access to the Network
89
Advertisement
Table of Contents
