NETGEAR FUSE User Manual page 64

Item Description
List of filtered ports – This list appears only if port filtering is on. Each port displays:
Label A name describing the application using the port.
Port The port that the application uses to access the Internet.
Protocol The protocol (TCP, UDP, etc.) being used by the application.
Enable Port Filtering
Before you can use or configure Port Filtering, you must enable it.
1. In the Mobile Hotspot Manager, click Settings > Router > Port Filtering.
2. In the Port Filtering list, select Black List to prevent specific applications from using the Internet,
or White List to allow only specific applications to use the Internet.
3. Click Submit.
Enable Port Filtering for an Application
You can enable port filtering for certain application types.
Note: Port Filtering must currently be enabled.
1. In the Mobile Hotspot Manager, click Settings > Router > Port Filtering.
2. In the Label field, enter a name that describes the application being filtered (for example,
"RandomEmailApp").
3. In the Port field, enter the port used by the application.
4. In the Protocol list, click the protocol(s) used for this application (TCP, UDP, or both).
5. Click the button to add this filter to the list.
6. Click Submit.
Disable Port Filtering for an Application
If you currently have port filtering enabled and some ports already in the list (Black List or White List), you
can remove any of those rows.
Note: Port Filtering must currently be enabled.
1. In the Mobile Hotspot Manager, click Settings > Router > Port Filtering.
2. Make sure you've enabled the correct port filtering type (Black List or White List).
Mobile Hotspot Manager (Browser) Interface
DRAFT
59