Enable Vpn Passthrough; Enable Upnp (Universal Plug And Play) - NETGEAR FUSE User Manual


If DMZ is not enabled, the incoming traffic is blocked.
Note: Putting a computer in the DMZ opens all the ports of that computer, and exposes that computer to
various security risks. Use this option only as a last resort — if possible, use other options instead (for
example, port forwarding).
Enable DMZ
Before you can use or configure DMZ, you must enable it.
1. In the Mobile Hotspot Manager, click Settings > Router > Basic.
2. Next to DMZ Enabled, select On.
3. Click Submit.
Configure the DMZ address
Specify which computer is to receive all unsolicited incoming connections.
Note: DMZ must currently be enabled.
1. In the Mobile Hotspot Manager, click Settings > Router > Basic.
2. In the DMZ Address, enter the IP address of the computer that you want exposed to the Internet.
(If you don't know how to find the IP address, see
3. Click Submit.

Enable VPN Passthrough

If you want to connect to a corporate network using their VPN (Virtual Private Network), you need to
enable VPN Passthrough.
1. In the Mobile Hotspot Manager, click Settings > Router > Basic.
2. Beside VPN Passthrough, select On.
3. Click Submit.

Enable UPnP (Universal Plug and Play)

UPnP provides simple and robust connectivity among consumer electronics, intelligent appliances, and
mobile devices from many different vendors. (For more information, see upnp.org.)
Note: If UPnP is enabled, there are potential security risks.
Before you can use UPnP, you must enable it.
1. In the Mobile Hotspot Manager, click Settings > Router > Basic.
2. Next to UPnP, select On.
3. Click Submit.
Mobile Hotspot Manager (Browser) Interface
DRAFT
Find the IP Address.)
54