Cannot Connect To The Mobile Broadband Network; Cannot Check For Updates - NETGEAR FUSE User Manual

®

Apple Safari
®

Apple Safari

Android Browser (Android OS 2.2 or later)
●
If your computer has other adapters (for example, Ethernet) connected to other networks, disable
or remove them from your computer.
●
If Internet security software is running on your computer, disable it and see whether the error
message still occurs. Some firewall software may block access to the home page.
●
If DHCP is enabled on your device, make sure DHCP is enabled on your computer. (See DHCP.)
●
Check your Web browser settings:
1. Open the Control Panel in Windows.
2. Double-click Internet Options.
3. From the Security tab, restore the default settings.
4. From the Connections tab, select Never dial a connection.
5. From the Advanced tab, restore the default settings.
6. Close and reopen your Web browser.
●
Disconnect your device from your computer (if you're using the micro-USB cable). Remove the
battery from your device. Reinsert the battery.
If, after checking all of the above, you still cannot display the home page, consider resetting the software
to default settings. (See Reset Your

Cannot Connect to the Mobile Broadband Network

If this message is displayed, go through the following steps.
●
Make sure your computer is connected to your device (through the micro-USB cable or WiFi).
(See Connect with WiFi (WLAN)
●
Make sure you're in a network coverage area.
●
Try the tips in Improving Signal
●
Check with your Internet service provider — a network or account problem may be preventing
your device from obtaining service.

Cannot Check for Updates

Make sure your device is connected to the AC charger or computer through the micro-USB cable.
Note: If you'll be using USB for data transfer (and not just for charging your device), you must install the
device driver. (See Making a Tethered
Appendix
(version 5.0 or later)
Mobile (version iOS 4.0)
Device.)
or Making a Tethered
Strength.
Connection.)
DRAFT
Connection.)
72