NETGEAR FUSE User Manual page 57

1. In the Mobile Hotspot Manager, click Settings > Router > Basic.
2. You can make changes to any of these fields. When you finish, click Submit.
The following information is displayed.
Item Description
UPnP
Current state of the Universal Plug and Play feature (On or Off). (See
UPnP
UPnP.)
LAN
IP Address The routing hardware's IP address on the LAN.
Netmask The routing hardware's internal LAN subnet mask.
USB IP Address The IP address assigned to the hotspot by the computer to which it is tethered.
VPN VPN connections are enabled (On) or disabled (Off). See
Passthrough Passthrough.
DHCP Server This field enables (On) or disables (Off) DHCP. See DHCP.
This specifies the starting and ending address of the range of IP addresses
DHCP IP Range available for your device to dynamically (that is, not permanently) assign to
computers connected to it. See DHCP.
Mobile Hotspot Manager (Browser) Interface
DRAFT
Enable
Enable VPN
52