Sleep / Autosleep; Sleep Function; Automatic Sleep Function; Setting The Autosleep Mode - Baratza Vario Operating Instructions Manual

The coffee grinder stops automatically on
reaching 0. To stop the coffee grinder at any
time during the grinding process, simply press
the START button again.
Depending on the required amount of coffee,
you can easily programme a longer or shorter
grinding time as follows:
1. To set the time, press the +/- buttons (Pos.
12/13) below the display. Press and hold the
respective button for three seconds in order to
advance or reduce the time more quickly.
2. As soon as you have reached the required time
setting, press and hold the corresponding do-
sing memory button (Espresso, Filter or Press)
for three seconds. The time shown in the dis-
play fl ashes in confi rmation that the setting
has been saved.
3. Repeat steps 1 and 2 above for the other two
dosing memory buttons. The amount of cof-
fee you have to grind depends on the type of
bean, the fi neness, the preparation method
and your personal taste. You will soon fi nd the
settings most suitable for your taste.

9. SLEEP / AUTOSLEEP

The coffee grinder has no power switch,
although it can be set to a sleep mode in order
to minimise the power consumption.

9.1 Sleep function:

The grinder is set to the sleep mode by
pressing and holding the START button for 3
seconds. The sleep mode can be deactivated
by pressing any other button, without
activating the function of this button.
9.2 Automatic sleep function (Autosleep):
If no button is pressed for three minutes,
the grinder switches automatically into the
Autosleep mode. Pressing any button restores
the grinder to the operating mode.
D O M E S T I C C O F F E E G R I N D E R S

9.3 Setting the Autosleep mode:

The factory setting (three minutes) can be
changed: To do this, press and hold the
MANUAL button for five seconds. The display
shows "S03". The time at which the grinder
goes into the Autosleep mode can now be set
with the aid of the +/- buttons. The available
settings are 3, 5, 10, 20, 30 minutes and 0 (=
no Autosleep). The setting is saved by pressing
the MANUAL button.
The programmed times for dosing also
remain saved in the Sleep mode or if the plug
is removed from the socket.

10. CARE AND CLEANING

DANGER Danger due to improper cleaning:
Improper cleaning can result in
damage to the appliance or personal
injury.
• Only dismantle the coffee grinder in
accordance with the information given in the
Section "Care and cleaning".
• Watch out for sharp edges when cleaning the
coffee grinder, particularly on the grinding
discs. Danger of injury!
• Never immerse the appliance itself, the
power supply cable or plug in water.
• Never touch the plug with wet hands.
• Never pull the plug out of the socket by the
cable, always grasp the plug.
• Never attempt to touch or pick up and
electrical appliance if it has fallen into water.
In this case, disconnect the plug from the
socket immediately.
• Check the appliance and cable regularly for
damage.
WARNING Danger due to unauthorised repair:
Repairs should be carried out only by
authorised customer service centres.
9