Breville BPR200 Instruction Booklet page 62

CARE ANd CLEANING PAge heAder.....
5. Disassemble lid.
a) First, gently pull the silicone rubber
gasket out from under the gasket
holder. Check periodically that it is
clean, flexible and not cracked or torn.
If damaged do not use the appliance.
WARNING
• Do not use abrasive cleaners, steel
wool or scouring pads.
• Do not immerse metal base or power
cord in water or any other liquid as
they may cause electrocution.
• Ensure removable cooking bowl is
correctly positioned in the base
before you commence cooking.
NOTE
After cooking rice or large meals,
some cooking liquid may pool under
lid at the top of appliance around the
cooking bowl. This is normal. Use a
paper towel or kitchen cloth to clean
after every use. Use a small brush or
cotton swab if necessary.
Call The Breville Customer Service
Centre. Phone: 1300 139 798 to order
a replacement.
NOTE
Replace silicone rubber gasket every
1–2 years (see your nearest Breville
Service Centre).
b) To remove gasket holder, turn the
holder so that the plastic tabs are not
touching the lugs on the lid.
Remove the gasket holder by pulling
straight up and out of the lid.
NOTE
There are 6 triangular metal cut out
grips around the inside of the lid that
keep the holder in place.
Wash gasket and holder in warm, soapy
water. Rinse with clean water, dry thoroughly
and place back in their original position.
NOTE
The silicone rubber gasket and
holder can be washed in the top rack
of a dishwasher to eliminate odour
from spices.
61