Mount As Network Drive - Buffalo TeraStation 1000 User Manual

Browse Shares
Exit
*"I'm here" is only available on TS1400D models. When clicked, the TeraStation will beep and its power LED will blink
red.
The following tasks may be performed from the TeraStation's properties page.
Name
Configuration
IP Address

Mount as Network Drive

You can easily map a shared folder as a network drive using NAS Navigator2.
1
Double-click the
2
Right-click on the TeraStation's icon, then click Map Share.
3
An icon for the mapped share will appear in Computer or My Computer. You can use this network drive just like
icon to start NAS Navigator2.
Shows a list of shared folders on the selected NAS device.
Exits NAS Navigator2.
Description
Click Settings to open the configuration interface.
Check Use DHCP to assign an IP address from the DHCP
server automatically. If there is no DHCP server on the
network, you cannot use this function. Check Renew IP
address to obtain an IP address from the DHCP server.
Uncheck Use DHCP and enter an IP address, subnet mask,
and default gateway to manually configure them.
85