Buffalo TeraStation 1000 User Manual page 52

6
Select the shared folder that will be the replication source, then click OK.
7
Click Browse under "Replication Target".
8
Select the shared folder that will be the replication target, then click OK.
9
Click OK.
10
Click Yes.
Notes:
• During setup, you may choose to encrypt and/or compress replication data. Encrypted data will transferred
securely on the network. Compressed data will ease network loading and is recommended for slow or heavily
loaded network connections. Either will increase the CPU load on the source TeraStation. Encrypted and
compressed data will be unencrypted and decompressed on the target TeraStation.
• A maximum of 2 shared folders can be configured for replication.
• Shared folders with a backup password set cannot be selected as replication targets.
• Replication can also be used to copy all data from a share to a share on an attached external drive. Format the
drive with ext3 or XFS before using it for replication. Drives with FAT32 and HFS+ partitions are not supported
with replication.
• You can select subfolders as the replication source. Folders whose names contain more than 80 alphanumeric
characters cannot be selected.
• Don't use the same TeraStation for both failover and replication, or replication and Time Machine.
• Don't configure replication from one source folder to multiple target folders.
51