Active Directory - Buffalo TeraStation 1000 User Manual

- An incomplete file may be copied and the file can no longer be deleted. If this happens, restart the TeraStation,
delete the file, and perform the copy operation again.
• After a drive is formatted, the "% Used" and "Amount Used" in Settings will not be 0. This is because some drive
space is used for the system area.

Active Directory

If an Active Directory environment, the TeraStation uses account information from the Active Directory domain
controller to set access restrictions for TeraStation's shared folders. There is no need to perform individual account
management for the TeraStation. If multiple TeraStations are installed on the network, the account information is
centrally managed in Active Directory, greatly reducing the operations required for installation and management.
Note: The TeraStation supports a domain environment with a maximum of 1000 users and 1000 groups. 10,000
users and 10,000 groups can be downloaded from the domain controller but are not supported.
1
In Settings, click Network.
2
Click to the right of "Workgroup/Domain".
3
Click Edit.
4
Select "Active Directory", then click Next.
5
Click Yes.
6
Enter the desired settings, then click OK.
7
In Settings, navigate to File Sharing - Folder Setup.
21