Rmm (Raid Mode Manager) - Buffalo TeraStation 1000 User Manual

RMM (RAID Mode Manager)

With RMM, you can create or expand a RAID array without erasing the data on the drives. Before using RMM, make
sure all inserted internal drives are the same size into the slots.
Changing from JBOD to RAID 1
Hard drives that aren't in a RAID array show "Normal". You must have at least two drives available in JBOD (not in a
RAID array) to build the RAID 1 array with RMM.
1
In Settings, click Drives.
2
Click to the right of "RAID".
3
Choose a RAID array.
4
Set the RAID mode to "RAID 1".
5
Check "Add a disk to RAID array with RMM. Your data will be preserved.".
6
Select the drive whose data will be saved from the drop-down menu.
7
Select the drive to add to the RAID array.
8
Click Create RAID Array.
28