Jumbo Frames - Buffalo TeraStation 1000 User Manual

Click Use Local Date/Time to use your computer's time settings for the TeraStation.
By default, the TeraStation adjusts its clock automatically by using a default NTP server. This NTP server belongs
to Internet Multi Feed Inc. For more information, visit www.jst.mfeed.ad.jp.
To use a different NTP server, select Name/Time/Language from Management. Click Time, then Edit. Uncheck
"Use Default NTP Server" and enter a new NTP IP address. Click OK.
If an NTP is not used, enter the time and date manually. Click Use Local Date/Time to import the time and date
from your computer.
If an NTP server is specified by name instead of IP address, make sure that a DNS server is configured for the
TeraStation.
Notes:
• The internal clocks of the TeraStation and other devices on your network may run at slightly different speeds.
Over a long period of time your network devices may show somewhat different times, which can cause
network problems. If clocks on your network vary by more than 5 minutes it may cause unexpected behavior.
For best results, keep all clocks on the network set to the same time by adjusting them regularly, or use an
NTP server to correct them all automatically.
• Disconnecting the AC cable from the TeraStation, even if it is not powered on, may cause the TeraStation's
time settings to become incorrect. This will affect scheduled settings such as backup jobs or sleep mode. If
this occurs, correct the time settings.
6
Click the Language tab. Select the language to be used and click OK.
Note: This tab changes the language used by the TeraStation for email notifications, DLNA, and other functions.
To change the language displayed in Settings, go to Advanced Settings or Easy Admin and click Language in the
menu bar. Choose your desired language from the drop-down menu.

Jumbo Frames

If your other network devices support it, you may be able to increase network performance with jumbo frames.
1
In Settings, click Network.
80