Buffalo TeraStation 1000 User Manual page 30

9
The "Confirm Operation" screen will open. Enter the confirmation number, then click OK.
Adding a Drive to an Existing RAID Array (TS1400D Only)
You can add a drive to a RAID 1 or RAID 5 array. Drives that can be added to the RAID array show "Normal".
Note: RMM can be used to expand an array by one drive per operation. To expand by two or more drives, RMM
must be performed multiple times.
1
In Settings, click Drives.
2
Click to the right of "RAID".
3
Choose a RAID array.
4
Select the drive to add to the RAID array.
5
Click Create RAID Array.
6
The "Confirm Operation" screen will open. Enter the confirmation number, then click OK.
Changing the RAID Mode While Adding a Drive (TS1400D Only)
Follow the procedure above. At step 4 above, select the drive you want to add to the RAID array and choose the
mode for the array. The "Confirm Operation" screen will open. Enter the confirmation number, then click OK.
29