Dmz - NETGEAR Fuse User Manual

Item
LAN
IP Address The routing hardware's IP address on the LAN.
Netmask The routing hardware's internal LAN subnet mask.
USB IP Address The IP address assigned to the hotspot by the computer to which it is
tethered.
VPN VPN connections are enabled (On) or disabled (Off). See Enable VPN
Passthrough Passthrough.
DHCP Server This field enables (On) or disables (Off) DHCP. See DHCP.
DHCP IP Range This specifies the starting and ending address of the range of IP addresses
available for your device to dynamically (that is, not permanently) assign to
computers connected to it. See DHCP.
DHCP lease This is the amount of time, in minutes, a computer can use its assigned IP
time address before it is required to renew the lease. After this time is up, the
computer is automatically assigned a new dynamic IP address. See DHCP.
Enter a number between 2 and 10080.
DNS mode This specifies how the DNS servers (that the DHCP clients are to
communicate with) are obtained.
Note: The DNS 1 and DNS 2 fields appear only if DNS Mode is Manual.
DNS 1 Address of a manual DNS server. (This field appears only if DNS Mode is
Manual.)
DNS 2 Address of a manual DNS server. (This field appears only if DNS Mode is
Manual.)

DMZ

DMZ Enabled Enable / disable demilitarized zone.
DMZ Address If DMZ is enabled, this is the IP address of a single computer used to receive
all unsolicited incoming connections.
DMZ
You can select one computer to receive all unsolicited incoming connections.
Settings
Manual – The routing hardware assigns DHCP clients the DNS
l
servers specified in the DNS 1 and DNS 2 fields
Use this option to access a DNS server that provides customized
addressing or if you have a local DNS server on your network.
Auto – The DNS server specified by your Internet service provider is
l
used.
Description
51