Set Up A Default Dmz Server - NETGEAR CBK40 User Manual

Orbi whole home wifi system built-in cable modem
Hide thumbs Also See for CBK40:
Table of Contents

Advertisement

The BASIC Home page displays.
4.
Select ADVANCED > Advanced Setup > Dynamic DNS.
The Dynamic DNS page displays.
5.
Change your DDNS account settings as necessary.
6.
Click the Apply button.
Your settings are saved.

Set Up a Default DMZ Server

The default DMZ server feature is helpful when you are using some online games and videoconferencing
applications that are incompatible with Network Address Translation (NAT). The cable modem router is
programmed to recognize some of these applications and to work correctly with them, but other applications
might not function well. In some cases, one local computer can run the application correctly if the IP address
for that computer is entered as the default DMZ server.
DMZ servers pose a security risk. A computer designated as the default DMZ server loses much of the
protection of the firewall and is exposed to exploits from the Internet. If compromised, the DMZ server
computer can be used to attack other computers on your network.
The cable modem router usually detects and discards incoming traffic from the Internet that is not a response
to one of your local computers or a service that you configured in the Port Forwarding/Port Triggering page.
Instead of discarding this traffic, you can specify that the cable modem router forwards the traffic to one
computer on your network. This computer is called the default DMZ server.
To set up a default DMZ server:
1.
Launch a web browser from a computer or mobile device that is connected to your Orbi network.
2.
Enter orbilogin.com.
A login window opens.
3.
Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time that you logged in.
The user name and password are case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > Setup > WAN Setup.
The WAN Setup page displays.
5.
Select the Default DMZ Server check box.
6.
Type the IP address.
7.
Click the Apply button.
Your settings are saved.
Orbi WiFi System
Specify Network Settings
42

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cbr40Rbs20

Table of Contents