Set The Lcd Timeout; Set The Lcd Brightness - NETGEAR Fuse User Manual

Set the Default Language
The default language is the language that will be used on the mobile hotspot's LCD screen, and
whenever you first open the Mobile Hotspot Manager.
1. In the Mobile Hotspot Manager, click Settings > General > Device.
2. Beside the Default Language, select English or Español.
3. Click Submit.
Temporarily Set the Mobile Hotspot Manager Language
You can temporarily change the language used to display the Mobile Hotspot Manager on your
computer. If you close the browser completely, the next time you open the Mobile Hotspot Manager,
the default language will be used.
In the language box at the top right corner of the screen, select the language to use temporarily.
n

Set the LCD Timeout

Use this feature to select the delay times before the LCD automatically turns off while running on
battery power, connected to the AC charger, or tethered via USB.
You can adjust these settings on the Mobile Hotspot Manager's Settings > General > Device
page.
Note: The LCD turns on if an alert occurs.
1. In the Mobile Hotspot Manager, click Settings > General > Device.
2. Beside the timeouts you want to set (Timeout on Battery, Timeout on AC, Timeout on
USB), select the desired timeout periods. (A smaller value helps prolong the battery life.)
3. Click Submit.

Set the LCD Brightness

Use this feature to adjust your screen's brightness to suit your surroundings and to prolong the
battery life.
You can adjust this setting on the Mobile Hotspot Manager's Settings > General > Device page.
1. In the Mobile Hotspot Manager, click click Settings > General > Device.
2. Beside Screen Brightness, select the desired brightness level (Bright or Dim). (Choose Dim
to prolong the battery life.)
3. Click Submit.
Settings 41