View Network Activation Information - NETGEAR Fuse User Manual

Item
Model The manufacturer's name for your device.
Mobile Hotspot URL for the Mobile Hotspot Manager Web app.
Manager
Power State The hotspot's power state (Online, Offline).
Current The hotspot's temperature. If your device is too warm, make sure the area is
temperature well-ventilated and air can circulate around your device to cool it. (See
Environmental Specifications.)
Current voltage The amount of power the hotspot is currently using.
Battery charge The amount of charge remaining in the battery. (See Charge the Battery.)
level
Battery status The current operating condition of the battery (Charging, No Battery, Normal,
Low, Critical).
Battery The battery's temperature. If the battery is getting too warm, turn your device
temperature off and do not connect to the charger.
WWAN Info
Activation Date The date that the hotspot was activated on the Mobile network.
Refurbished The date that your device was refurbished (if applicable).
Date
IP Address The IP address of the WWAN radio.
IPv6 Address
LTE APN NI 4G network identifier
Lifetime LTE The total amount of data sent and received while connected to LTE networks.
Transferred
Network Status
View Details Click the link to jump to the Network > Status Details tab.

View Network Activation Information

You can check whether network access is activated.
1. In the Mobile Hotspot Manager home page, click About in the top right corner of the page.
2. Check the Activation Date in the WWAN Info section. This is the date that the hotspot was
activated on the Mobile network.
Settings
Description
60