Enable Vpn Passthrough - NETGEAR Fuse User Manual

The IP address of the DMZ ("demilitarized zone") is the default recipient of incoming packets (from
the Internet) that are not handled by port forwarding rules or NAT'd connections:
If port forwarding is enabled, incoming traffic is routed according to the port forwarding rules or
n
NAT'd connections.
If incoming traffic was not routed as a result of the above:
n
If DMZ is enabled, then incoming traffic is routed to the computer that uses the IP address
l
specified by the DMZ settings.
If DMZ is not enabled, the incoming traffic is blocked.
l
Note: Putting a computer in the DMZ opens all the ports of that computer, and exposes that
computer to various security risks. Use this option only as a last resort — if possible, use other
options instead (for example, port forwarding).
Enable DMZ
Before you can use or configure DMZ, you must enable it.
1. In the Mobile Hotspot Manager, click Settings > Router > Basic.
2. Next to DMZ Enabled, select On.
3. Click Submit.
Configure the DMZ address
Specify which computer is to receive all unsolicited incoming connections.
Note: DMZ must currently be enabled.
1. In the Mobile Hotspot Manager, click Settings > Router > Basic.
2. In the DMZ Address, enter the IP address of the computer that you want exposed to the
Internet. (If you don't know how to find the IP address, see Find the IP Address.)
3. Click Submit.

Enable VPN Passthrough

If you want to connect to a corporate network using their VPN (Virtual Private Network), you need to
enable VPN Passthrough.
1. In the Mobile Hotspot Manager, click Settings > Router > Basic.
2. Beside VPN Passthrough, select On.
3. Click Submit.
Settings 52