Network Status Details - NETGEAR Fuse User Manual

Network Status Details

This tab shows you details about the current mobile broadband connection (LTE).
In the Mobile Hotspot Manager, click Settings > Network > Status Details.
n
The information that is displayed depends on your current connection.
Item
Status Indicates whether you are connected to an LTE network.
Connection The type of address to be set Ipv4 or IPv6 or IPv4v6 (both).
type
PS service type Indicates the LTE service type.
RSRP The signal strength of the LTE network. (Reference Signal Received Power)
RSRQ The signal quality of the LTE network (Reference Signal Received Quality).
RSRQ is the ratio between the RSRP and the Received Signal Strength
Indicator (RSSI).
RS-SINR Signal to Interference Noise Ratio based on Reference Signals (narrowband
and wideband).
Cell ID The LTE cell that is currently serving the hotspot.
TX Power The transmitter power. A higher number is better.
IP Address The IP address (32-bit value) of the 4G LTE connection.
IPv6 Address This is a 128-bit value.
Settings
Description
49