Port Filtering - NETGEAR Fuse User Manual

1. In the Mobile Hotspot Manager, click Settings > Router > Port Forwarding.
2. In the blank row of the list, enter a Label that describes the application (for example,
"RandomEmailApp").
3. In the IP field, enter the IP address of the server to be accessed.
4. In the Port field, enter the port used by the application. (If the application uses more than one
port, each port must be forwarded separately.)
5. In the Protocol list, click the protocol(s) used for this application (TCP, UDP).
6. Click the
button to add this row to the list.
7. Click Submit.
Disable Port Forwarding for an Application
If you want to stop forwarding any ports, you can remove them from the forwarding list.
Note: Port forwarding must currently be enabled.
1. In the Mobile Hotspot Manager, click Settings > Router > Port Forwarding.
2. Click the
button beside the row that you want to remove.
3. Click Submit.

Port Filtering

Port filtering lets you either allow (white list) or prevent (black list) which applications (for example,
http, ftp, email servers) can access the Internet.
Note: Only one list can be active, either a Black list or a White list. The Black list and White list are
separate – if you change the Port Filtering type, the corresponding list is displayed.
In the Mobile Hotspot Manager, click Settings > Router > Port Filtering.
n
You can:
Enable port filtering.
n
Add an application to a port filtering list.
n
Remove an application from the port filtering list.
n
Settings 56