The Cisco IP Phone 8800 Series supports 802.11r (FT) with WPA2-PSK or WPA2 and CCKM with WPA2 or WPA.
FSR Type
802.11r (FT)
802.11r (FT)
802.11r (FT)
CCKM
CCKM
EAP and User Database Compatibility
The following chart displays the EAP and database configurations supported by the Cisco IP Phone 8861.
Database Type
Cisco ACS
Windows SAM
Windows AD
LDAP
ODBC
(ACS for Windows Only)
LEAP Proxy RADIUS
Server
All Token Servers
Power Management
The power supply (CP-PWR-CUBE-4=) is required to enable the Cisco IP Phone 8861 for wireless LAN mode, as there is no
internal battery.
Wireless LAN is automatically disabled temporarily when Ethernet is connected to the Cisco IP Phone 8861, but will be
automatically re-enabled once Ethernet is disconnected if Wireless LAN was enabled previously.
The Cisco IP Phone 8861 primarily uses active mode (no Wi-Fi power save) when in idle or on call.
Null Power Save (PS-NULL) frames are utilized for off-channel scanning.
Cisco IP Phone 8800 Series Wireless LAN Deployment Guide
Authentication
Key Management
PSK
WPA2
EAP-FAST
WPA2
PEAP-MSCHAPv2
WPA2
EAP-FAST
WPA2, WPA
PEAP-MSCHAPv2
WPA2, WPA
EAP-FAST
(Phase Zero)
Yes
Yes
Yes
No
Yes
Yes
No
Encryption
AES, TKIP
AES, TKIP
AES, TKIP
AES, TKIP
AES, TKIP
PEAP-
MSCHAPv2
Yes
Yes
Yes
No
Yes
Yes
No
20