Call Control; Protocols; Access Points - Cisco 8800 Series Deployment Manual

Call Control

The Cisco IP Phone 8800 Series utilizes Session Initiation Protocol (SIP) for call control with the following applications.
Cisco Unified Communications Manager (CUCM)
•
Minimum = 8.5(1)
Recommended = 8.6(2), 9.1(2), 10.0 and later
Device Support in Cisco Unified Communications Manager
Cisco Unified Communications Manager requires a device package to be installed or service release update in order to enable
Cisco IP Phone 8800 Series device support.
Device packages for Cisco Unified Communications Manager are available at the following location.
http://software.cisco.com/download/navigator.html?mdfid=278875240

Protocols

Supported voice and wireless LAN protocols include the following:
Wi-Fi MultiMedia (WMM)
•
Traffic Specification (TSPEC)
•
Traffic Classification (TCLAS)
•
Session Initiation Protocol (SIP)
•
Real Time Protocol (RTP)
•
G.722, G.711, iSAC, iLBC, G.729
•
Cisco Discovery Protocol (CDP)
•

Access Points

The Cisco IP Phone 8800 Series is supported on the following Cisco Wireless LAN solutions.
Cisco Unified Wireless LAN Controller
•
Minimum = 7.0.250.0
Recommended = 7.4.121.0, 7.6.120.0
Cisco IOS Access Points (Autonomous)
•
Minimum = 12.4(21a)JY
Recommended = 12.4(25d)JA2, 15.2(4)JA1
Below are the Cisco Unified and Autonomous Access Points that are supported.
Cisco IP Phone 8800 Series Wireless LAN Deployment Guide
8