Cisco 8800 Series Deployment Manual page 45

Enable Power Save Plus
Phone On Time
Phone Off Time
Phone Off Idle Timeout
Cisco IP Phone 8800 Series Wireless LAN Deployment Guide
call is received. If Disabled, the LCD display will not turn on when a call is
received.
To enable the Power Save Plus feature, select the day(s) that you want the phone
to power off on schedule. You can select multiple days by pressing and holding
the Control key while clicking on the days that you want Power Save Plus to
operate. The default is disabled (no days selected). In Power Save Plus mode,
enough power is maintained to illuminate one key. All other functions of the
phone are turned off in Power Save Plus mode. Power Save Plus mode turns off
the phone for the time period specified in the Phone On Time and Phone Off
Time fields. This time period is usually outside of your organization's regular
operating hours. The illuminated key allows a user to press it to restore full power
to the phone. After pressing the illuminated key, the phone power-cycles and
reregisters with Unified CM before it becomes fully operational. Power Save Plus
is disabled by default. When you select day(s) in this field, the following notice
displays to indicate e911 concerns. By enabling Power Save Plus, you are
agreeing to the terms specified in this Notice. Notice: WHILE POWER SAVE
PLUS MODE (THE "MODE") IS IN EFFECT, ENDPOINTS CONFIGURED
FOR THE MODE ARE DISABLED FOR EMERGENCY CALLING AND
FROM RECEIVING INBOUND CALLS. BY SELECTING THIS MODE, YOU
AGREE TO THE FOLLOWING: (I) YOU ARE TAKING FULL
RESPONSIBILITY FOR PROVIDING ALTERNATE METHODS FOR
EMERGENCY CALLING AND RECEIVING CALLS WHILE THE MODE IS
IN EFFECT; (II) CISCO HAS NO LIABILITY IN CONNECTION WITH
YOUR SELECTION OF THE MODE AND ALL LIABILITY IN
CONNECTION WITH ENABLING THE MODE IS YOUR
RESPONSIBILITY; AND (III) YOU WILL FULLY INFORM USERS OF THE
EFFECTS OF THE MODE ON CALLS, CALLING AND OTHERWISE.
: WHILE POWER SAVE PLUS MODE (THE "MODE") IS IN EFFECT,
ENDPOINTS CONFIGURED FOR THE MODE ARE DISABLED FOR
EMERGENCY CALLING AND FROM RECEIVING INBOUND CALLS. BY
SELECTING THIS MODE, YOU AGREE TO THE FOLLOWING: (I) YOU
ARE TAKING FULL RESPONSIBILITY FOR PROVIDING ALTERNATE
METHODS FOR EMERGENCY CALLING AND RECEIVING CALLS
WHILE THE MODE IS IN EFFECT; (II) CISCO HAS NO LIABILITY IN
CONNECTION WITH YOUR SELECTION OF THE MODE AND ALL
LIABILITY IN CONNECTION WITH ENABLING THE MODE IS YOUR
RESPONSIBILITY; AND (III) YOU WILL FULLY INFORM USERS OF THE
EFFECTS OF THE MODE ON CALLS, CALLING AND OTHERWISE.
This field determines the time that the phone turns on automatically on the days
that are selected in the Enable Power Save Plus list box. Enter the time in 24 hour
format, where 00:00 represents midnight. For example, to automatically turn the
phone on at 7:00 a.m., (0700), enter 07:00. To turn the phone on at 2:00 p.m.
(1400), enter 14:00. If this field is blank, the phone automatically turns on at
00:00. The default is blank.
This field determines the time of day that the phone will turn itself off on the days
that are selected in the Enable Power Save Plus list box. Enter the time in the
following format hours:minutes. If this field is blank, the phone automatically
turns off at midnight (00:00). The default is blank. Note: If Phone On Time is
blank (or 00:00) and Phone Off Time is blank (or 24:00), the phone will remain
on continuously, effectively disabling the Power Save Plus feature unless you
allow EnergyWise to send overrides.
This field represents the number of minutes that the device must be idle before
the device will request the power sourcing equipment (PSE) to power down the
45