Honeywell evohome Installation Manual page 11

evohome Installation Guide
P9
Step 2: Set up your
Central Controller
The Central Controller has a guided configuration process
to help you set up the zones for a single type of system.
For mixed systems (i.e. Under Floor Heating zones plus
Radiator zones) use Guided Configuration for the larger
system then "Add Zones" in the installer menu.
To add a stored hot water system use the guided
configuration Stored Hot Water option in the installer menu.
The following instructions cover the full configuring process
for a zone, but if you are using Guided Configuration your
Central Controller will give you on-screen instructions to
bind the other components to the Central Controller – just
follow the bind instruction for each device in this manual.
In this section
Powering up your Central Controller 10