Honeywell evohome Installation Manual page 37

P35
evohome Installation Guide
Wireless Cylinder Thermostat (CS92A)
Press the button on the Cylinder Thermostat transceiver
1
The green light should come on. If it doesn't,
2
reinsert the batteries and try again
The Central Controller will display the signal strength
(poor to excellent) and the transceiver should flash
the red LED from 1 flash (poor) to 5 flashes (excellent)
– no flashing means the transceiver has not received
a test signal from the Central Controller.
To exit test mode press the button on the transceiver.
1
PRESS FOR
5 SECONDS