Hardware Installation - HIKVISION DS?2CD883F?EW Installation Manual

Network box camera

Hide thumbs Also See for DS?2CD883F?EW:

Table of Contents

Installation Manual of Network Box Camera

2.2 Hardware Installation

Box camera can be fixed in both wall and ceiling, customers can choose different ways to install the

camera according to their specific needs. The following section introduces the ceiling mounting, and

the wall mounting follows the same way:

Step 1: Fix the camera mounting bracket to the ceiling.

Fig 2.2.1 Fix camera mounting bracket

NOTE:

If it is wall, you need to fix the expand bolt (note: the mounting hole of the expand bolt should align

with the bracket) before fixing the bracket as ① in Fig 2.2.1 . If the wall surface is wooden, the part

of ① in Fig 2.2.1 can be ignored and you can use the self‐tapping screw to directly fix the bracket.

Please note that the wall on which the camera is fixed should be able to bear at least three times

the weight of the bracket and the camera.

Step 2: Screw the mounting hole to the mounting bracket, and then adjust the camera to the

desired monitoring location and finally tighten the knob on bracket to secure the camera to the

ceiling.

Table of Contents