Table of Contents
Advertisement
4
Installation Manual of Network Cube Camera
2.2 Hardware Installation
Cube camera can be fixed in both wall and ceiling, customers can choose diffierent ways to install
the camera according to their specific needs. The following section introduces the ceiling mounting,
and the wall mounting follows the same way:
Step 1: Fix the camera mounting bracket to the ceiling.
Fig 2.2.1 Fix camera mounting bracket
NOTE:
If it is wall, you need to fix the expand bolt (note: the mounting hole of the expand bolt should align
with the bracket) before fixing the bracket as ① in Fig 2.2.1 . If the wall surface is wooden, the part
of ① in Fig 2.2.1 can be ignored and you can use the self‐tapping screw to directly fix the bracket.
Please note that the wall on which the camera is fixed should be able to bear at least three times
the weight of the bracket and the camera.
Step 2: Screw the mounting hole to the mounting bracket, and then adjust the camera to the
desired monitoring location and finally tighten the knob on bracket to secure the camera to the
ceiling.
Advertisement
Table of Contents
