Hardware Installation - HIKVISION DS-2CD7133-E Installation Manual

Installation Manual of Network Mini Dome Camera

2.2 Hardware Installation

The ceiling mount is a suitable installation method for this camera. Please stick to the
following
steps:
NOTE:
If required, user can apply the pliers
to remove the clip (refer to the part
marked in dotted line) on the side of
the back box and then feed cables
through the opening to secure on
the ceiling.
1. Loosen the set screws with a hexagonal screw driver (attached with the camera), and take
down the back box shown as below:
2. Use the screws to fix the bottom board on the ceiling.
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©
Fig. 2.2.1 Remove the back box
6