Hardware Installation - HIKVISION DS-2CD7153-E Installation Manual

Installation Manual of Network Mini Dome Camera

2.2 Hardware Installation

The ceiling mount is a suitable installation method for this camera. Please stick to the following
steps:
NOTE:
If required, user can apply the pliers to
remove the clip (refer to the part marked
in dotted line) on the side of the back
box and then feed cables through the
opening to secure on the ceiling.
1. Loosen the set screws with a hexagonal screw driver (attached with the camera), and take down
the back box shown as below:
2. Use the screws to fix the bottom board on the ceiling.
3. While viewing the video on the computer, adjust the camera's view angle for your need.
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©
Fig. 2.2.1 Remove the back box
Fig. 2.2.2 Fix the bottom board
5