Hardware Installation - HIKVISION DS-2CD7133-E Installation Manual

Installation Manual of Network Mini Dome Camera

2.2 Hardware Installation

The ceiling mount is a suitable installation method for this camera. Please stick to the
following steps:
NOTE:
If required, user can apply the
pliers to remove the clip (refer to
the part marked in dotted line) on
the side of the back box and then
feed cables through the opening to
secure on the ceiling.
1. Loosen the set screws with a hexagonal screw driver (attached with the camera),
and take down the back box shown as below:
2. Use the screws to fix the bottom board on the ceiling.
3. While viewing the video on the computer, adjust the camera's view angle for
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©
Fig. 2.2.1 Remove the back box
Fig. 2.2.2 Fix the bottom board
5