Using Bluetooth; Initial Configuration - Honeywell THOR VM1 Reference Manual

Using Bluetooth

Start > Control Panel > Bluetooth or Bluetooth icon in taskbar or Bluetooth icon on desktop
or Tap the Bluetooth icon in the taskbar to open the Bluetooth LXEZPair application.
The Thor VM1 default Bluetooth setting is Enabled.
The Thor VM1 Bluetooth
Prerequisite: The remote Bluetooth devices have been setup to allow them to be "Discovered" and "Connected/Paired". The
System Administrator is familiar with the pairing function of the remote Bluetooth devices.
Bluetooth Devices Display - Before Discovering Devices
Note: When Filtered Mode is enabled, only Bluetooth printers or Bluetooth scanners/imagers are recognized and displayed
in the Bluetooth panel. All other Bluetooth devices are ignored.

Initial Configuration

1. Select Start > Control Panel > Bluetooth or tap the Bluetooth icon in the taskbar or on the desktop.
2. Tap the Settings Tab.
3. Change the Computer Friendly Name
Computer Description. Honeywell strongly urges assigning every Thor VM1 a unique name (up to 32 characters) before
Bluetooth Discovery is initiated.
4. Check or uncheck the Thor VM1 Bluetooth options on the Settings tab.
5. Tap the OK button to save your changes or the X button to discard any changes.
®
module is designed to Discover and pair with nearby Bluetooth devices.
at the bottom of the Settings display. The Bluetooth Thor VM1 default name is the
3-19