Installing A User Certificate - Honeywell THOR VM1 Reference Manual

Installing a User Certificate

After generating and exporting
Thor VM1.
Locate the certificate file (it has a .PFX extension) and double-click on it.
Troubleshooting: If the Certificate Wizard does not start automatically when you double-tap the certificate .PFX file:
1. Select Start > Run and type certmgr.msc in the text box and tap OK.
2. In the left pane, right-click Personal and select All Tasks > Import.
3. The Certificate Import Wizard starts.
4. Tap Next and use the Browse... button to locate the User certificate copied to the Thor VM1. If necessary, change the
file type drop down list at the bottom of the explorer window from *.cer to *.pfx. After selecting the .PFX file, tap Open.
5. The certificate filename and path are displayed. Tap Next.
6. Follow the instructions that follow starting with the
The certificate import wizard starts. Tap Next.
Confirm the certificate file name and location.
Tap Next.
You are prompted for the password that was assigned when the certificate was exported.
It is not necessary to select either of the checkboxes displayed above.
Enter the password and tap Next.
the user certificate, copy it from the PC to the Thor VM1. Copy the certificate to a location on the
prompt for password.
4-53