Autoon; Standard; Ignition Control - Honeywell THOR VM1 Reference Manual

AutoOn

Start > Control Panel > AutoOn (Classic view)
Select the desired Ignition Control / Auto On behavior.

Standard

The Thor VM1 is turned on and off manually by the user using the power button on the front of the device.
The power switch on the Quick Mount Smart Dock must be On and the Thor VM1 connected to external power.
l
In the absence of external power the Thor VM1 can operate from a sufficiently charged UPS battery.
l
The Ignition Input wire, which is part of the DC Power Cable, is left disconnected.
l
When the Thor VM1 is on, the behavior of the power button press is configurable using the

Ignition Control

The Thor VM1 is turned on automatically when a signal is received via the Ignition Input wire, which is part of the DC Power
Cable.
The power switch on the Quick Mount Smart Dock must be On.
l
The Ignition Input wire is connected to an appropriate source that provides a signal when vehicle ignition is turned on.
l
Please see the Thor VM1 WES Vehicle Mounting Reference Guide for cautions and wiring instructions.
When the vehicle ignition is turned off, this is treated the same as a power button press. The behavior of the power button press
is configurable using the Power Options control panel.
Power Options control panel.
3-5