Preparing for Installation
Warning
EMC Regulatory Statements
U.S.A.
Taiwan
Package Contents
Cisco 575 LRE CPE Hardware Installation Guide
2-4
The ports labeled "ENET" and "PWR" are safety extra-low voltage (SELV)
circuits. Only connect SELV circuits to other SELV circuits. The ports labeled
"PHONE" and "WALL" may be connected to telephone network voltage (TNV)
circuits. Do not connect the SELV circuit to the TNV circuits. To avoid
electric shock, do not connect safety extra-low voltage (SELV) circuits to
telephone network voltage (TNV) circuits. Although the ENET ports use
RJ-45 connectors that will accept RJ-11 telephony plugs, TNV circuits must
not be connected to the ENET ports. Use caution when connecting cables.
U.S. regulatory information for this product is in the front matter of this manual.
When you unpack the CPE, be sure that the package contains the items in the
following list. If any items are missing, notify your authorized Cisco sales
representative:
•
Cisco 575 LRE CPE
AC power cord and adapter
•
Chapter 2
Installation
78-11469-01