What's New In This Version - Cisco TelePresence MX200 G2 Administrator's Manual

Cisco TelePresence MX200 G2 and MX300 G2
Contents

What's new in this version

This section provides an overview of the new and changed
system settings and new features in the TC7.3 software
version.
Software release notes
For a complete overview of new features and changes, we
recommend reading the Software Release Notes (TC7). Go
to:
http://www.cisco.com/c/en/us/support/collaboration-
endpoints/telepresence-mx-series/tsd-products-support-
series-home.html
Software download
For software download go to:
http://www.cisco.com/cisco/software/navigator.html
D15078.04 MX200 G2 and MX300 G2 Administrator Guide TC7.3, DECEMBER 2014.
Introduction Introduction Web interface
New features and improvements
Local preview of presentation in a call
This allows the user to preview the presentation locally before
sharing it with far end. The feature has previously been
available for EX systems, and is now available across the
portfolio.
Web snapshots: Notify user when snapshots are taken
Both the on screen display and web interface have warnings
when the snapshots feature is enabled. A notification pops up
on the on screen display, when a snapshot is taken. On the
web interface the administrator is warned that this notice will
show up when the feature is enabled.
The system also logs when snapshots are taken, and which IP
address the request was initiated from.
It is possible to allow and disallow snapshots remotely, but
not to observe the room without the users being notified.
System settings
System configuration changes
New configurations
Cameras Preset TriggerAutofocus
H323 Profile Encryption KeySize
NetworkServices CDP Mode
Configurations that are removed
H323 Profile [1] Encryption MinKeySize
Configurations that are modified
FacilityService Service [5] Name
FacilityService Service [5] Number
Video AllowWebSnapshots
www.cisco.com — Copyright © 2013–2014 Cisco Systems, Inc. All rights reserved.
6
Administrator Guide
Setting passwords Appendices
OLD: <S: 0, 255>
NEW: <S: 0, 1024>
OLD: <S: 0, 255>
NEW: <S: 0, 1024>
OLD: <Off/On>, default Off
NEW: <Off/On/LocalDeviceOnly>, default
LocalDeviceOnly