Security Session Showlastlogon; Security Session Inactivitytimeout - Cisco TelePresence MX200 G2 Administrator's Manual

Cisco TelePresence MX200 G2 and MX300 G2
Contents

Security Session ShowLastLogon

When logging in to the system using SSH or Telnet you will see the UserId, time and date of the
last session that did a successful login.
Requires user role: ADMIN
Value space: <Off/On>
On: Show information about the last session.
Off: Do not show information about the last session.
Security Session ShowLastLogon: Off
Example:

Security Session InactivityTimeout

Determine how long the system will accept inactivity from the user before he is automatically
logged out.
Requires user role: ADMIN
Value space: <0..10000>
Range: Select a value between 1 and 10000 seconds; or select 0 when inactivity should not
enforce automatic logout.
Security Session InactivityTimeout: 0
Example:
D15078.04 MX200 G2 and MX300 G2 Administrator Guide TC7.3, DECEMBER 2014.
Introduction Web interface System settings System settings
www.cisco.com — Copyright © 2013–2014 Cisco Systems, Inc. All rights reserved.
90
Administrator Guide
Setting passwords Appendices