Adding Option Keys - Cisco TelePresence MX200 G2 Administrator's Manual

Cisco TelePresence MX200 G2 and MX300 G2
Contents

Adding option keys

Your video system may or may not have one or more
software options installed. In order to activate the optional
functionality the corresponding option key must be present
on the video system.
Option keys are not deleted when performing a software
upgrade or factory reset, so they need to be added only
once.
Each video system has unique option keys, for
example: 1R000-1-AA7A4A09
Contact your Cisco representative to obtain information about
available option keys, and how to get the required key(s).
D15078.04 MX200 G2 and MX300 G2 Administrator Guide TC7.3, DECEMBER 2014.
Introduction Web interface Web interface
Navigate to: Maintenance > Option Keys
Add an option key
i. Enter an Option Key in the
appropriate text input field.
ii. Click Add option
If you want to add more than one option
key, repeat these steps for all keys.
System settings
key.
www.cisco.com — Copyright © 2013–2014 Cisco Systems, Inc. All rights reserved.
49
Administrator Guide
Setting passwords Appendices